Concentrated powder that cleans and rejuvenates exterior surfaces. Suitable for wooden decks, and other semi-porous surfaces such as concrete drive ways and surfaces with organic soiling. Non-caustic, non-chlorinated and non-acidic formula. Safely removes stains and soiling.
Concrete / Tiled Surfaces: Dissolve 5 scoops into a plastic bucket with 5 litres of hot water. Allow the solution to sit for approximately 3-5 mins then evenly pour directly over surfaces. Leave for 2 mins to activate then scrub with a brush or stiff broom, adding more solution to surfaces as required. Rinse well and allow to dry.
Wooden Decks / Surfaces: Use the same process as above, however a more even coverage may be achieved with the use of a plastic watering can, while also reducing product wastage through gaps in decking timber. AGENT-OXY may be used with spray equipment, as long as product is completely dissolved. Always rinse or wash areas with fresh water to finish. While AGENT-OXY should not cause any damage to plants, foliage or animal life, always immediately rinse the product off with fresh cold water. AGENT-OXY is designed for ‘best use’ with hot water, above 50-60°c and it will foam up on application.
5Kg
